ChassisMain Chassis section is two channels welded together to form a box section size is 220 x 160m . Top chassis is 150 x 75 channel Spring Drawbar15 Tonne type with 32 mm dia “U” bolts Drawbar pivits on 50 mm dia pin Drawbar eye is 90 x 40 section Springs13 Tonne spring unit with 32 mm dia spring eye pins running through a brass bush. Rocking BeamOptional in lieu of springs Axles80 mm section, standard track is 1800 mm, other track available to order. 8000 kg cap per axle Brakes are 350 x 60 mm BrakesHydraulic Operation of Cam brakes with one cylinder per wheel complete with adjustor screw. Wheel/Tyres8 stud rims on remould tyres with speed rating of 60 kph capacity 8000 kg/axle options of higher spec axles. Body§ Floor 5 mm plate with 60 x 40 box section Floor runners § Sides are 3 mm plate with 80 x 80 x 3 box Section top rail, vertical ribs fully welded § Rear door has box section frame ladder fitted to front panel § Size 18 ft x 4 ft 3” high x 7 ft 4” wide inside mud guard standard (5486 mm long x 1295 mm high x 2235 mm wide) Lift CylindersTwin 3 stage 10 Tonne cylinders mounted low in the chassis to give max lift and reduce stress on trailer chassis. Pin holes are 32 mm dia Hydraulic Hoses to cylinders are ½ bore twin wire braided. LightsMarker Lights/rear lamps wired to socket on the front of trailer. A separate lead is used from this socket to the tractor.
|
|
Phone: (0044) 01400 261061 |
|
To contact us: |
|
Warranties
Parts bought in carry their own manufacturing warranty of 12 month. Our own work will be guaranteed for 2 years subject to fair wear and tear. |
|
Armstrong & Holmes Ltd |
|
South Heath Lane, Fulbeck, Grantham Lincs, NG32 3HX 01400 261061 01400 262289 fax anne@farmtrailers.co.uk |